Trevi Pools Vertical Bottom Plate 211 “E” #TRF58208GF

Description

Trevi Pools Vertical Bottom Plate 211 “E” #TRF58208GF

The TRF58208GF Trevi Bottom Plate is a structural base component used on Trevi above-ground pools. It sits at the bottom of each vertical upright and connects the wall structure to the bottom rail system.

Trevi TRF58208GF Bottom Plate

Type: Bottom plate / bottom foot plate
Manufacturer: Trevi (often distributed through Cornelius / Wilbar parts networks)
Material: Resin or coated metal depending on production run
Used On: Various Trevi round above-ground pools (commonly 18-21-24-27-30 ft models) as well as all ovals

What the Bottom Plate Does

• Supports the vertical uprights of the pool wall
• Locks the bottom rail or bottom track in place
• Provides the anchor point where the upright bolts to the base
• Helps keep the pool wall round and properly spaced during installation

Without this part the bottom rails cannot hold the wall in position.

Where It Sits on the Pool

Each upright of an above-ground Trevi pool sits on a bottom plate like this.

Structure order from ground up:

1. Pool base / sand or patio blocks
2. Bottom plate (TRF58208GF)
3. Bottom rail / track
4. Pool wall
5. Upright post
6. Top plate / top seat

---

Compatibility

Trevi parts can be confusing because the same pools were sold under multiple names:

• Trevi
• Cornelius
• Aqua Leader
• Wilbar

Many parts interchange depending on the year.