Sirona Spa Care Simply Start-Up Kit

Description

Description

Sirona Spa Care Simply Start-Up Kit is a must have start up product to ensure your spa water is properly taken care of. Use this kit at every fresh fill to ensure that your spa is protected against bacteria, contaminants, scum, stains and scaling deposits. The kit contains all of the necessary sanitation and preventative products, but it does not contain the balancers that are also necessary for normal spa operation. Enjoy softer and safer water using the Sirona Spa Care Simply Start-Up Kit.

• Protect spas against bacteria, contaminants, scum, stains and scaling deposits
• Contains all of the necessary sanitation and preventative products
• Enjoy softer and safe water

Contents

• 1 x Sirona Spa Care Simply Sanitizer (8 oz)
• 1 x Sirona Spa Care Simply Waterline Control (8 oz)
• 1 x Sirona Spa Care Simply Oxidizer (16 oz)
• 1 x Sirona Spa Care Simply Metal Control (16 oz)
• 1 x Sirona Spa Care Simply Test Strips (10 ct)

Directions

Sirona Spa Care Simply Sanitizer

Start Up: Important – Sirona Spa Care Simply Sanitizer is incompatible with chlorinating and brominating chemical products.

1. Remove chlorine or bromine source and disconnect feeder. Discontinue use of ionizers and electrochlorinators if present.
2. Drain existing water in spa or hot tub.
3. Clean spa surface and filter.
4. Fill spa with water.
5. Have your authorized Sirona Spa Care dealer check your water for proper water balance.
6. After water has been balanced, add Sirona Spa Care Simply Sanitizer to give a concentration of 50 ppm (1 oz of product per 150 gallons of spa water).
7. Circulate water 15 minutes then check Sirona Spa Care Simply Sanitizer concentration with Sirona Spa Care Simply Test Strips and adjust if necessary.

Normal Spa Maintenance:

1. Every week, check Sirona Spa Care Simply Sanitizer concentration and pH. Adjust if necessary.
2. When the level of Sirona Spa Care Simply Sanitizer is 30 ppm or less, add enough Sirona Spa Care Simply Sanitizer to bring the level up to 50 ppm.
3. The spa’s level of Sirona Spa Care Simply Sanitizer should never be allowed to drop below 30 ppm. To raise the Sirona Spa Care Simply Sanitizer level 10 ppm, add 0.2 fl oz per 150 gallons of spa water.

Sirona Spa Care Simply Waterline Control

Start-Up:

• With jets turned off, add 1.5 fluid ounces of Sirona Spa Care Simply Waterline Control for every 150 gallons of water.

Weekly Maintenance:

• With blowers turned off, add 3/4 fluid ounce of Sirona Spa Care Simply Waterline Control for every 150 gallons of water.

Recommendations:

Follow the Sirona Spa Care Simply 3-Step System as outlined below.

• Clean your spa shell at the waterline regularly.
• Clean your filter every 30-60 days – depending on frequency of use.
• Change your spa water every 60-90 days – depending on frequency of use.

Sirona Spa Care Simply Oxidizer

Start Up:

• Add 3 ounces of Sirona Spa Care Simply Oxidizer per 150 gallons of spa water.
• Be sure to wipe with a clean, damp cloth any excess product that drips down the side of the bottle.
• Circulate water for a minimum of 15 minutes.

Routine Maintenance:

1. Once a week, add 1.5 – 3 fl oz (depending on spa usage) of Sirona Spa Care Simply Oxidizer per 150 gallons of spa water.
2. Be sure to wipe with a clean, damp cloth any excess product that drips down the side of the bottle.
3. Circulate water for a minimum of 15 minutes.

Sirona Spa Care Metal Control

Remedial Dose:

• Add one fluid ounce of Sirona Spa Care Metal Control per 150 gallons of spa water.
• Run filter continuously for a minimum of 20 minutes.

Ingredients

Sirona Spa Care Simply Sanitizer:

• Poly(hexamethylenebiguanide) hydrochloride: 20%, Other Ingredients: 80%

Sirona Spa Care Simply Waterline Control:

• Bis (hydrogenated tallow alkyl) dimethyl quaternary chlorides: 61789-80-8, Bis (hydrogenated alkyl methyl amines) hydrochloride: 61788-63-4, Isopropyl Alcohol:67-63-0

Sirona Spa Care Simply Oxidizer

• Hydrogen Peroxide: 7722-84-1, Water: 7732-18-5

Sirona Spa Care Simply Metal Control

• Tetrasodium Ethylenediametetraacetic Acid: 64-02-8, Sodium Hydroxide: 310-73-2, Water: 7732-18-5