Carvin Jacuzzi Sharkjet Pump Eye Seal 10146207R

Description

DETAILS

Description

• Carvin Jacuzzi Sharkjet Pump Eye Seal 10146207R
• Carvin Direct OEM Pump Eye Seal
• Original Replacement Part for Carvin Sharkjet Pump
•  Designed to use with the Carvin Jacuzzi Series Pumps
  • The Jacuzzi # 10-1462-07-R Eye Seal is used on many common Jacuzzi brand pumps including the Magnum, Cygnet, Splash Pak and many more.  This is a round, double stepped eye seal that fits over the inlet of the pump impeller. Inside diameter is the same all the way through; outside diameter is larger at the front of the seal and then steps down.  The larger end faces away from the impeller when installed.  Made of a flexible rubber-like plastic material in black.

Size

• OUTSIDE DIAMETER: 2-1/2" (A) (LARGER SIDE)
• OUTSIDE DIAMETER: 2-5/16" (A) (SMALLER SIDE)
• FRONT TO BACK: 3/8" (B)
• THIS IS 2-1/2" DIAMETER FOR 1/8" OF THE FRONT TO BACK DISTANCE AND 2-5/16"FOR THE REMAINING 1/4"
• INSIDE DIAMETER: 2"

Alternate part numbers/replacements

• This Pump eye seal can replace all of the following part numbers below
• 85853300, 31-105-1090