Poolife NST Prime Tablets

Description

Description

The poolife NST Prime tablets are an excellent product to sanitize your pool in an easy way without over-stabilizing the water. These slow dissolving cal-hypo tablets are designed to be able to be used with the poolife NST Feeder or in a skimmer. Not only will this chlorine tablet sanitize your pool by destroying bacteria and organic contaminants, but it will not lose chlorine due to over stabilization from cyanuric acid. The NST Prime Tablets are compatible with chlorine, salt chlorine generators, ozone and mineral systems. Use these convenient tablets to help keep your pool water as clean and safe as possible.

DO NOT USE IN NORMAL CHLORINATORS SUCH AS HAYWARD & CMP CHLORINATORS OR CHLORINATORS THAT ARE NOT APPROVED FOR CAL-HYPO TABLETS

GASES EXPAND IN FILTER HOUSING AND CHLORINATOR DUE TO THE OFF GASING OF THESE TABLETS  COULD CASUE A HAZARDOUS EXPLOSION

ONLY TO BE USED IN A CHLORINATOR APPROVED FOR CALCIUM HYPOCHLORITE TABLETS

Dosage

1 Tablet per 10,000 gallons of water per week or as need to maintain a chlorine residual of 1-4 ppm.

Directions for Skimmer Use

• Do not allow this product in any chlorinating device which has previously contained other chemicals.
• Use in pools with a skimmer and skimmer basket.
• Skimmer basket should be free of all other water treatment.
• Place tablet in the empty skimmer basket.
• Replace with a new tablet as needed.
• Do not mix with other products or dissolve before use.

Directions for Poolife NST Chlorione Floater

• Add sanitizer tablets to empty chlorine floater and lock lid.
• Run pool pump for 8 hours minimum daily.
• Test water frequently and adjust number of tablets to maintain 1-4 ppm free available chlorine.

Water Balance:
For optimum product performance, swimmer comfort and crystal clear water, always maintain pH from 7.2 to 7.6, total alkalinity from 60 to 120 ppm and calcium hardness above 200 ppm. Test frequently using a reliable test kit that measure all the above ranges. Use Poolife pool care products to make adjustments. Follow label directions for each product. Do not enter pool until free available chlorine residual is 1-4 ppm for each of the below water treatment applications.

Routine Chlorination:
For best results, see Water Balance section before treatment. Throughout the pool season, adjust pH to 7.2 to 7.6. Begin using 1 tablet of this product per 10,000 gallons of pool water. After one day, use a suitable test kit to check free available chlorine residual. Increase or decrease the number of tablets to maintain a free available residual of 1-4 ppm.

Ingredients

• Calcium Hypochlorite: 70.2%
• Other Ingredients: 29.8%