Poolife Endure Water Conditioner

Description

Poolife Endure Water Conditioner is a highly effective product designed to soften pool water while helping to clarify
and improve filtration efficiency. Proper use can enhance swimmer comfort while keeping pool water crystal clear.

Dosage

• Add 2 lbs per 1,000 gallons of pool water.

Directions

• Sanitize with bromine, chlorine, or biguanide before treatment.
• Backwash and clean the filter.
• Balance pool water and adjust pH between 7.2 – 7.6.
• Broadcast product evenly over the pool surface with the pump running.
• Apply in three separate doses, adding one-third of the required amount per application.
• Brush any undissolved product from the bottom of the pool.
• The pH may rise during treatment — adjust back to 7.2 – 7.6 approximately one hour after each application.
• Allow at least 8 hours between applications.
• Do not add additional chemicals until pH is properly balanced.
• Approximately 1 lb of pH decreaser may be needed for every 2 lbs of this product used.
• Within 10 days, have water professionally tested to confirm balance and effectiveness.

Product Specifications