CuLator 4.0 Metal Eliminator and Stain Preventer for Pools & Spas

Description

DETAILS

CuLator Ultra 4.0 removes 4 ppm total dissolved metals from your pool water, which prevents pool staining and water discoloration.  The goal is to have 0.0 metals in your water.  CuLator  eliminates stain-causing metals like copper, iron, manganese and lead from pool water. CuLator Ultra 4.0 is perfect for pools which have a lot of metals, larger pools, pools on well water, pools which have had a copper coil  heater “blow out” and commercial pools. The CuLator Ultra 4.0 may also be used as a seasonal treatment for general maintenance and during pool stain treatment.  CuLator Ultra 4.0 has four times the power of a CuLator 1.0.

• Eliminates 4.0 ppm total dissolved metals (staining begins at .3) from 20,000 gallons
• Works in fresh or salt water
• No phosphates
• Non-toxic
• Free reusable protective “GatorEgg” included
• Use in skimmer or pump basket
• Works for up to 30 days or much longer depending on your metal level
• Made in USA
• Contents change color depending on metal removed

NOTE: IF POOL HAS MAIN DRAIN SYSTEM PLACE IN HAIR AND LINT POT IN FRONT OF MOTOR SO 100% OF WATER COMES IN CONTACT WITH POUCH WEATHER THE MAIN DRAIN OR SKIMMER IS ON

• Eliminates 4.0 ppm total dissolved stain-causing metals from 20,000 gallons
• Works in fresh or salt water
• No phosphates
• Non-toxic
• Works for up to 30 days or longer depending on your metal level
• Made in USA

RECOMMEND USES:

• Monthly stain prevention treatment
• Pools using well water
• Salt water pools
• Companion to sequestrants
• With algaecides to prevent stains
• With mineral purification systems
• For pools up to 20,000 gallons (75,000L)
• Vinyl, fiberglass, and gunite pools
• Screened in pools
• Pools with stones or bricks for decking or coping