Dolphin Robotic Cleaner Eon 100

Description

Dolphin Robotic Cleaner Eon 100

Dolphin EON 100 is a smart, track-driven robotic pool cleaner designed to deliver visibly cleaner water with less effort. Built for everyday pool maintenance, it combines Dolphin’s trusted cleaning performance with modern connectivity, so you can enjoy a sparkling pool without lifting a finger. <…> – 70-micron sealed filtration for cleaner water: This advanced filtration system captures smaller debris before it escapes back into your pool, helping your water look crisper and feel better on contact. –

MaytronicsOne App

• The Maytronics One App lets you easily control your Dolphin EON 100/120d. You can choose the cleaning modes and scanning type, set your preferred parking wall, schedule weekly cleanings, check the filter level status, and water temperature, all while the robot is out of the water.

UltraRun™ Mode

• UltraRun™ is a cleaning scheduler that lets you keep your robot in the pool up to a week for the EON 100  before recharging. It’s easy to set: you can do it directly on the robot interface or through the Maytronics One app to tailor the scanning and cleaning modes to your specific pool requirements.

EON™ 100 UltraRun™ Cycle Options:

 

Steps Jet Cleaning

• The EON 100 uses JETIQ™ technology to climb and clean pool steps by directing water through a servo to create a controlled flow that helps the robot ascend and remove debris. The robot detects the first step, climbs to the top, and cleans the top step for about 30 seconds before moving down step by step, cleaning each stair. Once it reaches the bottom, the robot slightly repositions itself and repeats the process for a second cycle, then finishes with a final ascent back to the top. The robot will repeat this up to 3 times for a duration of 12 minutes.

SunTan Ledge Cleaning

• The robot can clean sun-ledges as shallow as 8 inches, using dual-drive brushes to scrub the surface thoroughly. Once it climbs onto the sun ledge, the impeller briefly turns off as the robot moves toward the wall and, then does a 90-degree turn, followed by a zigzag cleaning pattern across the ledge. After reaching the opposite wall and turning again, a detection mechanism activates if the rear of the robot nears the ledge, guiding the robot back onto the sun ledge to continue cleaning.

Homing Wall

• With the Homing feature, the EON 100/120d parks at your preferred wall after each cleaning cycle, including during UltraRun™ cycles. You can easily set or change the Homing Wall in the app!

Clicker

• The EON 100 is compatible with the Clicker as an optional accessory if you’d like to add this feature.

Filter Indicator

• The filter indicator has two status levels: 0% full and 100% full. When the filter is completely full, you will receive an app notification, and the robot’s power LED will turn solid yellow.

Filtration & Baskets

• The EON™ 100 comes with a closed, fine (70 micron) filter basket with a lid that traps more debris due to filtration from all directions. There is an optional add-on filter basket available that does not include the backwash feature. This basket is 110 microns and does not have a top lid. It also features double sealing around the top to help trap debris more effectively. It is possible to install fine filter panels on this basket.
• BASKETS ARE SHOWEN IN PHOTOS SMALLER 70 MICRON BASKET COMES WITH UNIT

Water Temperature Indicator

• The app displays the water temperature when the robot was last placed in the pool, giving you a quick view of current pool conditions.

Cleaning Modes and Scanning Patterns

• Select from multiple cleaning modes, including Regular, Floor-Only, Waterline-Only, UltraClean, Smart, and UltraRun. You can also choose between maze or line-by-line scanning patterns to optimize coverage for your pool.

Visual Effects

• The blue ambient LED on the front of the EON™ 100/120d adds a modern visual touch. You can adjust the brightness or turn it off entirely through the app settings.

History

• View details from the most recent cleaning cycle.

Charging Status

• The app’s home screen displays the robot’s battery level and charging progress, so you always know when it’s ready for the next clean.

Helpful App Insights and Support

• The app provides guidance, including usage tips, maintenance reminders, and support resources. You can also purchase spare parts and available upgrades directly through the app for added convenience.

Push Notifications

• Start the cycle in the app and receive a notification when the cleaning cycle is complete! When the filter reaches 100% capacity, a full filter notification will appear in the app once the robot is out of the water and connected.

Hybrid Power Flexibility:

• Choice to use cordless freedom or plug-in power – coming in late 2026

Warranty Built to Last:

•  Modular design, 3-year warranty, exceptional after-sales service and support, and 40+ years of trusted innovation. This is the Dolphin Difference